Description
The Outback Power EnergyCell 1600NC is a 67 kWh, 48 volt (1392 amp hour @ 24 hours), Nano-Carbon High Capacity VRLA-AGM battery and rack system. Part of the EnergyCell NC High Capacity Series from Outback, these batteries are designed for large residential or commercial self consumption renewable energy power demands.
EnergyCell Nano-carbon delivers all the safety and convenience of a VRLA battery with the cycling benefits of advanced energy storage. Maintaining the capacity of the Nano-Carbon battery in a 30-80% state of charge can maximize your overall cycle life by up to 44% versus a traditional VRLA deep cycle battery. Nano-carbon is a partial state of charge (PSOC) battery chemistry that excels in three types of installations: off-grid deep cycle, grid-tied self-consumption, and grid-tied energy backup. The technology sits in the middle both in terms of price and performance, about 10 percent more expensive than lead-acid, but with advanced cycling capabilities. The reason is increased carbon coverage, up to 100x more than a traditional lead-carbon on the negative plate, which decreases sulfating. The EnergyCell NC also features low profile terminals with threaded copper alloy inserts providing reduced maintenance and increased safety.
Optimized to work seamlessly with OutBack power conversion equipment. For backup power energy storage, the EnergyCell 1600NC battery is the ideal choice for superior performance and longevity, and is backed by a 3-year full replacement warranty. Order online or by PHONE 888-498-3331
Product Highlights
- Ideal solution for residential and light-commercial applications where limited sun hours are available for proper recharging of standard deep cycle batteries
- Safe, maintenance-free valve regulated Absorbent Glass Mat (AGM) technology
- Easy to install and maintain - Pre-assembled steel racking included with intercell connects and front access to cell connections
- High round trip efficiency—up to 95%
- Partial State of Charge (PSoC) Operation insures long life
- High amperage recharge acceptance allows for fast recharge
- OPTICS RE connectivity means real-time access to critical battery performance data
- 3-year full replacement warranty
Parts / Specifications
Manufacturer: |
Outback Power |
PRODUCT LINE: |
EnergyCell Nano-Carbon High Capacity |
Model Number: |
EnergyCell 1600NC |
Technology: |
VRLA-AGM Carbon |
Nominal Voltage Per System: |
48VDC |
Nominal Voltage Per Cell: |
2V |
Cycle Life (50% DOD, 1.75VPC): |
2000 |
Absorb Voltage (25°C): |
57.6VDC |
Absorb Time: |
2 hours |
Float Voltage (25°C): |
54.4VDC |
Float Time: |
= absorb time |
Equalize Voltage: |
2.32VDC |
Re-Bulk Voltage: |
48VDC |
Re-Float Voltage: |
12.5VDC / 25VDC / 50VDC |
Maximum Charge Current (Per Battery): |
595A |
Temp-Comp Factor (Charging): |
-2 mV/cell/°F above 77°F, +2 mV/cell/°F below 77°F |
Self-Discharge Time: |
12 months @ 25°C |
Hardware Specification (Intercell Connects): |
Threaded copper alloy insert terminal to accept M6-16 bolt |
Terminal Hardware Initial Torque: |
110in-lbs (12.4Nm) |
Weight (lb/kg): |
4420 lb / 2205 kg |
48V System Dimensions H x D x W (in/cm): |
63.78 x 26.38 x 28.25 in / 16.20 x 6.70 x 7.18 cm |
48V Standard System Configuration: |
4w x 6h |
48V Ampere Hour Capacity of 20Hr Rate to 1.75 Volts Per Cell at 77°F (25°C): |
1376.0 Ah |
48V Ampere Hour Capacity of 24Hr Rate to 1.75 Volts Per Cell at 77°F (25°C): |
1392.0 Ah |
48V Ampere Hour Capacity of 100Hr Rate to 1.75 Volts Per Cell at 77°F (25°C): |
1600.0 Ah |
Energy (kWh) at 24Hr: |
66.82 kWh |
Warranty: |
3 year full replacement warranty |
