Description
The Generac SnapRS is an inline disconnect device that is designed to be installed between each PV module for compliance with NEC 2017/2020 Rapid Shutdown requirements. This rapid shutdown inline disconnect features a simple design that configures easily to your solar system. The SnapRS disconnect device does not require any extra hardware to mount, no pairing and no digital communications. Simply connect a Generac SnapRS disconnect device to each PV module for total rapid shutdown performance.
When signaled by the inverter, SnapRS units break the PV circuit, reducing array voltage to less than 80V in seconds. Connect a Generac SnapRS disconnect device to the negative whip (-) of each module in the solar array for simple NEC-2017 module-level rapid shutdown compliance. SnapRS devices isolate array voltage when a rapid shutdown command is given by a connected Inverter.
Installation is fast and easy as the device clicks into place. With a rugged design, the SnapRS is waterproof, heat-proof, dustproof, shockproof and ice-proof, and is backed by a 25-year standard warranty. Order online or by PHONE 888-498-3331
Product Features
- Fast and easy installation
- One SnapRS device per PV module, installs on a 1:1 ratio
- Low cost, high efficiency solution
- 25-year warranty
- NEC 2017 and 2020 PVRSS compliant
Parts / Specifications
Manufacturer: |
Generac |
Product: |
SnapRS |
Model: |
RS802 |
PV MODULE MAX VOC: |
75 V |
EFFICIENCY: |
99.8% |
MAX INPUT CURRENT: |
15 A |
SHUTDOWN TIME: |
< 10 Seconds |
ENCLOSURE RATING: |
NEMA 6P |
CERTIFICATIONS: |
UL1741 |
WEIGHT: |
0.17 lb (0.08 kg) |
DIMENSIONS (L x W x H): |
1 x 1 x 7 inch (25.4 x 25.4 x 177.8 mm) |
WARRANTY: |
25 Years |