Description
The Enphase Q-12-17-240 two-wire, double-insulated Enphase Q Cable is a continuous length of outdoor rated cable with integrated connectors for Enphase IQ Microinverters. These connectors are preinstalled along the Q Cable at intervals to accommodate PV module widths. The microinverters plug directly into the cable connectors. The cable is installed by simply rolling out the desired length of cable and cutting it to size. One end is wired directly into the junction box or Epnhase Q Aggregator at the head of the branch circuit, eliminating the need for a separate AC interconnect cable. The other end is sealed from the environment using an Enphase Terminator and any unused connectors should be sealed with Q Cable Sealing Caps. The microinverter AC cable connectors are then plugged into the regularly-spaced connectors. Connectors are spaced 78.7" on center for 60-cell module landscape orientation; match the number of connectors with the number of IQ Microinverters to be installed. The 2-wire cable is 50% lighter than previous generation Enphase cable. New cable numbering simplifies wire management is more cost-effective with less cable waste. Plug-and-play connectors speed up installation and is more cost-effective with less cable waste. UL listed. Enphase, IQ, Q-Cable, 240 Volt, for 60 cell 1.7m Landscape module pitch. Connector Pitch is 2.0m (78.7"), Q-12-17-240
