Description
The EG4 3kW hybrid inverter charger is an easy to install and high performing 3,000 watt (3kW), 120V - 240Vac, continuous power system for grid-tied or stand-alone solar power generation for small builds and critical loads panels. The single unit operates as a power inverter, battery charger, and system monitor that will minimize utility grid dependence and optimize the balance between battery storage and renewable energy sources. This EG4 hybrid inverter combines the capabilities of an inverter, MPPT solar charger, and battery charger to provide uninterrupted power support in a single, portable-sized package. The system can be connected to up to 5,000 watts of solar panels and has a user-friendly interface with an LCD display that offers user-configurable and easy-accessible button operation, including battery charging current, AC/Solar charger priority, and acceptable input voltage based on different applications. Ideal use for in RVs, cabins, storage sheds, and shops. Backed by a 3 year product warranty.
FEATURES
- 3,000 watt continuous output
- Stackable - Parallel up to 12 Units for a 36kW System
- BMS communication available with all EG4 batteries
- Overload, short circuit & over temperature protection
- 3 year warranty
Videos
View AllClose
Parts / Specifications
Manufacturer: |
EG4 Electronics |
Model: |
EG4 3000 EHV-48 |
Solar AC Input Data: |
SOLAR AC INPUT DATA |
Nominal AC Voltage: |
120 VAC |
Frequency: |
50/60Hz (auto detection) |
Transfer Time: |
UPS - 10 ms typical, Appliance - 20 ms typical |
Rated Output Power: |
3kW (3,000 watts) |
Output Voltage Waveform: |
Pure Sine Wave |
Output Voltage Regulation: |
110 / 120VAC |
Output Frequency: |
50Hz or 60Hz (selectable) |
Battery to Inverter Efficiency: |
94% Peak |
PV to Inverter Efficiency: |
97% Peak |
Overload Protection: |
5s at 150-200 Percent Load, 10s @ 110 to 150 Percent Load |
Surge Capacity: |
6kW for 5 Seconds |
Rated Power: |
5000W |
Max PV Array Open Circuit: |
500VDC |
PV Array: |
120VDC - 450VDC |
Max Input Current Draw: |
18A |
Number of MPPT: |
1 |
Max Charging Current (PV): |
80A |
Compatible Battery Type: |
Compatible with all 48V EG4 Electronics batteries |
Nominal Battery Voltage: |
48V |
General Data: |
GENERAL DATA |
Dimensions: |
17.6” x 11.6” x 4.1” (4.8”) |
Weight: |
21.6 (26.8 ship) lbs |
Storage Tempurature Range: |
5 to 140 ° F ( -15 to 60 °C) |
IP Rating: |
IP21 |
Idle Power Consumption: |
less than 50W, less than 15W (Saving Mode) |
Warranty: |
3 year standard warranty |
Certifications: |
UL1741 |
EG4 inverter datasheet
