Description
The SolarEdge Home Hub with HD-wave Prism technology is a hybrid inverter that does it all. The 7.6kW (7600 watt) Home Hub single phase inverter is ready to connect solar panels, battery and EV charging for great flexibility when on-grid or during an off-grid power outage. Requires SolarEdge optimizers (sold separately) for operation.
When connected with a battery and the Backup Interface, the SolarEdge Home Hub inverter is a DC-coupled solution that provides affordable power to the home everyday. It can deliver power during grid outages or to maximize self-consumption during peak utility rate times. For big electrical loads, the Home Hub can be combined with up to three inverters connected to the SolarEdge 200 Amp Backup Interface for auto-transfer and full home backup, either with or without a generator. It also allows for the stacking of 2 batteries per inverter for greater power and storage capacity to keep the entire home covered. The Home Hub inverter is compatible with the LG Chem RESU battery or the SolarEdge Energy Bank battery. UL certified and backed by a 12 year warranty. Order online or PHONE 888-498-3331
Product Features
- Requires SolarEdge optimizers
- DC-coupled scalable solution for full or partial home backup
- 99% weighted efficiency with 200% DC oversizing
- Built-in consumption monitoring
- Remotely monitor PV system with the SolarEdge Monitoring mobile application
- Pre-configured to connect to the optional SolarEdge Smart Level 2 EV charger
- Generator compatible
- Lightweight and easy to install
- Ready for smart energy add-on products
- 12 year warranty, with optional 20-25 year extension
- Certified to UL1741, UL1741SA, UL1699B, UL1998, UL9540, CSA 22.2
- Qualifies for Federal Energy Tax Credit and State and Utility Solar Rebates!
Parts / Specifications
Manufacturer: |
SolarEdge |
Model: |
Single Phase Home Hub Inverter with Prism Technology |
Model Number: |
SE3800H-USS3BBC14, USE3800H-USMNBE78 |
OUTPUT - AC ON GRID: |
OUTPUT - AC ON GRID |
Rated AC Power: |
3800 watts |
Maximum AC Power Output: |
3800 watts |
AC Frequency Range (min - nom - max): |
59.3 - 60 - 60.5 Hz |
Maximum Continuous Output Current: |
16 Amps |
GFDI Threshold: |
1 Amp |
Total Harmonic Distortion (THD): |
<3% |
Power Factor: |
1, adjustable -0.85 to 0.85 |
Utility Monitoring, Islanding Protection, Country Configurable Thresholds: |
Yes |
Charge Battery from AC (if Allowed): |
Yes |
Typical Nighttime Power Consumption: |
<2.5 W |
OUTPUT - AC BACKUP: |
OUTPUT - AC BACKUP |
Rated AC Power in Backup Operation: |
3050 watts |
Peak AC Power (<10 sec) in Backup Operation: |
3400 watts |
AC L-L Output Voltage Range in Backup: |
211-264 Vac |
AC L-N Output Voltage Range in Backup: |
105-132 Vac |
AC Frequency Range in Backup (min - nom - max): |
55 - 60 - 65 Hz |
Maximum Continuous Output Current in Backup Operation: |
12.7 Amps |
Peak AC Current (<10sec) in Backup Operation: |
14.2 Amps |
GFDI: |
1 Amps |
THD: |
<5% |
OUTPUT - SMART EV CHARGER AC: |
OUTPUT - SMART EV CHARGER AC |
Rated AC Power: |
9,600 watts |
AC Frequency Range (min - nom - max): |
59.3-60-60.5 Hz |
Maximum Continuous Output Current @240V (grid, PV and battery): |
40 Amps AC |
INPUT - DC (PV AND BATTERY): |
INPUT - DC (PV AND BATTERY) |
Transformer-less, Ungrounded: |
Yes |
Max Input Voltage: |
480 Vdc |
Nominal DC Input Voltage: |
380 Vdc |
Reverse-Polarity Protection: |
Yes |
Ground-Fault Isolation Detection: |
600kë© Sensitivity |
INPUT - DC (PV): |
INPUT - DC (PV) |
Maximum DC Power: |
7600 watts |
Maximum Input Current: |
10.5 Amps DC |
Max. Input Short Circuit Current: |
45 Amps DC |
Maximum Inverter Efficiency: |
99.2% |
CEC Weighted Efficiency: |
99% |
INPUT - DC (BATTERY): |
INPUT - DC (BATTERY) |
Supported Battery Types: |
SolarEdge Energy Bank or LG Energy RESU Prime |
Number of Batteries per Inverter: |
Up to 3 Energy Bank or 2 LG RESU |
Maximum Battery Capacity per Inverter: |
19.6 kWh |
Continuous Power Per Inverter: |
5000 watts |
Peak Power: |
6900 watts |
Max Input Current @240V: |
18 Amps DC |
SMART ENERGY CAPABILITIES: |
SMART ENERGY CAPABILITIES |
Consumption Metering: |
Built-in |
Battery Storage: |
With Backup Interface for service up to 200A; Up to 3 inverters, 15kW backup power, and 60kWh backup capacity |
EV Charging: |
Direct connection to Smart EV charger |
ADDITIONAL FEATURES: |
ADDITIONAL FEATURES |
Supported Communication Interfaces: |
RS485, Ethernet, Wi-Fi (optional), Cellular |
Revenue Grade Metering, ANSI C12.20: |
Built-in |
Integrated AC, DC and Communication Connection Unit: |
Yes |
Inverter Commissioning: |
with the SetApp mobile application using built-in Wi-Fi Access Point for local connection |
DC Voltage Rapid Shutdown (PV and Battery): |
Yes, according to NEC 2014 and 2017 690.12 |
STANDARD COMPLIANCE: |
STANDARD COMPLIANCE |
Safety: |
UL1741, UL1741 SA, UL1699B, UL1998, UL9540, CSA 22.2 |
Grid Connection Standards: |
IEEE1547, Rule 21, Rule 14H |
Emissions: |
FCC part15 class B |
INSTALLATION SPECIFICATIONS: |
INSTALLATION SPECIFICATIONS |
AC Output Conduit Size / AWG Range: |
3/4'' maximum / 14-8 AWG |
EV AC Output Conduit Size / AWG Range: |
3/4'' maximum / 14-8 AWG |
DC Input (PV) Conduit Size / AWG Range: |
3/4'' maximum / 14-8 AWG |
DC Input (Battery) Conduit Size / AWG Range: |
3/4'' maximum / 14-8 AWG |
Dimensions with Connection Unit (HxWxD): |
17.7 X 14.6 X 6.8 in / 450 X 370 X 174 mm |
Weight with Connection Unit: |
26 lb / 11.8 kg |
Noise: |
< 25 dBA |
Cooling: |
Natural Convection |
Protection Rating: |
NEMA 4X |
SolarEdge Single Phase Home Hub Inverter Datasheet
