Description
The SolarEdge Energy Hub Inverter with Prism technology is a hybrid inverter that connects PV solar and storage battery in one integrated unit. The 11.4kW (11,400 watt AC output) Energy Hub single phase inverter is ready for battery, EV charging, generator, and includes built-in consumption monitoring. The built-in cellular modem and consumption meter allows the homeowner to easily track energy usage and reduce utility bills.
When connected with a battery and backup interface, the Energy Hub DC-coupled solution provides power to the home during grid outages and peak utility times for maximum solar use and self-consumption. For more loads, the Energy Hub can be paired with the SolarEdge 200 Amp Backup Interface for full home backup. Engineered to meet evolving household needs, the system is scalable with up to 3 inverters in connection. It also allows for the stacking of 2 batteries per inverter for greater power and storage capacity to keep the entire home covered. The Energy Hub inverter is compatible with the SolarEdge Energy Bank battery or the LG Energy RESU-Prime battery. The modular setup allows up to 32 kWh of lithium battery storage per inverter The SolarEdge Energy Hub inverter is UL certified and backed by a 12 year warranty. Order online or PHONE 888-498-3331
Product Features
- DC-coupled scalable solution for full or partial home backup
- 99% weighted efficiency with up to 200% DC over-sizing
- Delivers up to 10,300 watts AC backup power
- Built-in consumption monitoring
- Remotely monitor PV system with the SolarEdge Monitoring mobile application
- Pre-configured to connect to the optional SolarEdge Smart Level 2 EV charger
- Compatible with SolarEdge Energy Bank or the LG Energy RESU Prime battery
- Lightweight and easy to install
- Ready for smart energy add-on products
- 12 year warranty, with optional 20-25 year extension
- Certified to UL1741, UL1741SA, UL1699B, UL1998, UL9540, CSA 22.2
- Qualifies for Federal Energy Tax Credit and State and Utility Solar Rebates!
Videos
-
Energy Hub Inverter with Prism Technology Overview
Watch this technical overview of the Energy Hub inverter with ...
-
Energy Hub Inverter with Prism Technology: Battery Modes and Descriptions
This video will guide you through the battery modes available ...
-
Energy Hub Inverter with Prism Technology: Battery Wiring LG RESU10H (deprecated)
Note that support for the LG RESU10H has been removed for curr...
-
Energy Hub Inverter with Prism Technology Battery Configuration and Commissioning
This video will guide you through the battery configuration an...
-
Guide to Commissioning Your SolarEdge Inverter with SetApp| International
Effortless Setup: Commissioning Your SolarEdge Inverter with S...
-
Whole Home Backup with SolarEdge Battery
"We chose SolarEdge because we were able to backup our whole h...
-
SolarEdge Home Hub Inverter Wiring Overview
This video will walk you through the basics of wiring the Sola...
Parts / Specifications
Manufacturer: |
SolarEdge |
Model: |
Single Phase Energy Hub Inverter with Prism Technology |
Model Number: |
SE11400H-USS; SE11400H-USSNBBL14 |
OUTPUT - AC ON GRID: |
OUTPUT - AC ON GRID |
Rated AC Power: |
11,400 watts @ 240Vac |
Maximum AC Power Output: |
11,400 watts @ 240Vac |
AC Frequency Range (min - nom - max): |
59.3 - 60 - 60.5 Hz |
Maximum Continuous Output Current: |
47.5 Amps @ 240Vac |
GFDI Threshold: |
1 Amp |
Total Harmonic Distortion (THD): |
<3% |
Power Factor: |
1, adjustable -0.85 to 0.85 |
Utility Monitoring, Islanding Protection, Country Configurable Thresholds: |
Yes |
Charge Battery from AC (if Allowed): |
Yes |
Typical Nighttime Power Consumption: |
<2.5 W |
OUTPUT - AC BACKUP: |
OUTPUT - AC BACKUP |
Rated AC Power in Backup Operation: |
10,300 watts |
Output Voltage Range in Backup: |
211-264 Vac AC L-L ; |
Output Voltage Range in Backup: |
211 - 264Vac AC L-L; 105-132 Vac AC L-N |
AC Frequency Range in Backup: |
55 - 60 - 65 Hz (min - nom - max) |
Output Current in Backup Operation: |
43 Amps Maximum Continuous |
GFDI: |
1 Amps |
THD: |
<5% |
OUTPUT - SMART EV CHARGER AC: |
OUTPUT - SMART EV CHARGER AC |
Rated AC Power: |
9,600 watts |
AC Frequency Range (min - nom - max): |
59.3-60-60.5 Hz |
Maximum Continuous Output Current @240V (grid, PV and battery): |
40 Amps AC |
INPUT - DC (PV AND BATTERY): |
INPUT - DC (PV AND BATTERY) |
Transformer-less, Ungrounded: |
Yes |
Max Input Voltage: |
480 Vdc |
Nominal DC Input Voltage: |
380 Vdc |
Reverse-Polarity Protection: |
Yes |
Ground-Fault Isolation Detection: |
600kΩ Sensitivity |
INPUT - DC (PV): |
INPUT - DC (PV) |
Maximum DC Power: |
22,800 watts @ 240Vac |
Maximum Input Current: |
31 Amps DC |
Max. Input Short Circuit Current: |
45 Amps DC |
Maximum Inverter Efficiency: |
99.2% |
CEC Weighted Efficiency: |
99% |
INPUT - DC (BATTERY): |
INPUT - DC (BATTERY) |
Supported Battery Types: |
SolarEdge Energy Bank or LG Energy RESU Prime |
Number of Batteries per Inverter: |
3 Energy Bank or 2 LG RESU |
Maximum Battery Capacity per Inverter: |
32 kWh |
SMART ENERGY CAPABILITIES: |
SMART ENERGY CAPABILITIES |
Consumption Metering: |
Built-in |
Battery Storage: |
With Backup Interface for service up to 200A; Up to 3 inverters, 15kW backup power, and 60kWh backup capacity |
EV Charging: |
Direct connection to Smart EV charger |
ADDITIONAL FEATURES: |
ADDITIONAL FEATURES |
Supported Communication Interfaces: |
RS485, Ethernet, Wi-Fi (optional), Cellular |
Revenue Grade Metering, ANSI C12.20: |
Built-in |
Communication Connection Unit: |
Integrated AC, DC |
Inverter Commissioning: |
with the SetApp mobile application using built-in Wi-Fi Access Point for local connection |
DC Voltage Rapid Shutdown (PV and Battery): |
Yes, according to NEC 2014 and 2017 690.12 |
STANDARD COMPLIANCE: |
STANDARD COMPLIANCE |
Safety: |
UL1741, UL1741 SA, UL1699B, UL1998, UL9540, CSA 22.2 |
Grid Connection Standards: |
IEEE1547, Rule 21, Rule 14H |
Emissions: |
FCC part15 class B |
INSTALLATION SPECIFICATIONS: |
INSTALLATION SPECIFICATIONS |
AC Output Conduit Size / AWG Range: |
1'' maximum / 14-6 AWG |
EV AC Output Conduit Size / AWG Range: |
1'' maximum / 14-6 AWG |
PV Conduit Size / AWG Range: |
1'' maximum / 14-6 AWG DC Input (PV) |
Battery Conduit Size / AWG Range: |
1'' maximum / 14-6 AWG |
Dimensions with Connection Unit: |
17.7 X 14.6 X 6.8 in (450 X 370 X 174 mm) (HxWxD) |
Weight with Connection Unit: |
30.2 lb (13.7 kg) |
Noise: |
< 25 dBA |
Cooling: |
Natural Convection |
Protection Rating: |
NEMA 4 |
SolarEdge Single Phase Energy Hub Inverter with Prism Technology Datasheet
