The S-5-E Mini is a medium-duty, non-penetrating seam clamp. It is slightly shorter than the S-5-E and having one setscrew rather than two. Order online or PHONE 888-498-3331 WANT A SOLAR PANEL SYSTEM AT THE LOWEST COST?  START SOLAR...

VersaBracket can be used to mount almost anything to an exposed-fastened roof system and is compatible with nearly any trapezoidal exposed-fastened profile. This S-5! bracket offers various mounting face configurations with minimum purchase requirements...

The S-5-S Mini is a medium-duty, non-penetrating seam clamp. The S-5-S Mini is shorter than the S-5-S and having one setscrew rather than two. S-5! clamps protect roof coatings and weather-tightness warranties since they do not pierce metal roof paneling...

S-5! Clamp CorruBracket Mini mount for corrugated metal roofs, CorruBracket 100T Mini. The clamps comes with with one (1) butyl pad, two (2) 10.41mm mounting holes, and one (1) M8-1.25 Threaded hole. Bolts and fasteners not included. Order online or...

VersaBracket can be used to mount almost anything to an exposed-fastened roof system and is compatible with nearly any trapezoidal exposed-fastened profile. This S-5! bracket offers various mounting face configurations with minimum purchase requirements...

CorruBracket 100T is compatible with 7/8" and 3/4" corrugated roofing. CorruBracket comes with factory-applied sealant already in the base for a water-tight attachment. CorruBracket will support heavy-duty applications like snow retention. Order online...

S-5! Clamp Size E, S-5-E , is designed for a Butler roof with a rolled top seam. S-5! clamps protect roof coatings and weather-tightness warranties since they do not pierce metal roof paneling. They are designed to easily be installed at any location...

S-5! Clamp Size K Grip-Mini, S-5-K Grip Mini, fits KlipRib and other bulb snap-together seams. The S-5! Clamp Size K Grip-Mini requires inserts, look for product name "Insert for S-5-K Grip-Mini clamp," which are sold separately. S-5! clamps protect roof...

S-5! Clamp Size N Mini fits 1.5" nail strip metal roof profiles including triangle type profiles, S-5-N Mini 1.5. Order online or PHONE 888-498-3331 WANT A SOLAR PANEL SYSTEM AT THE LOWEST COST?  START SOLAR DESIGN

The S-5-U Mini is a medium-duty, non-penetrating seam clamp. It is slightly shorter than the S-5-U and has one setscrew rather than two. Order online or PHONE 888-498-3331 WANT A SOLAR PANEL SYSTEM AT THE LOWEST COST?  START SOLAR DESIGN

S-5! Clamp RibBracket IV mount for corrugated metal roofs to mount directly into the crown, with (1) EPDM rubber gasket seal, (4) 8mm thru holes, (1) slotted .4" x 1.25" hole, (4) self-tapping screws, & (1) M8 flange nut RibBracket III. S-5! clamps...

This S-5! clamp is specially designed for SolarFoot mounts for Trapezoidal metal roofs. It has butyl pads, four (4) 8mm mounting holes, and one (1) M8-1.25 X 17mm Threaded Stud with Flange Nut. Fasteners are not included for direct L-Foot, SolarFoot,...

S-5 Mini clamps are designed for 1" nail strip metal roof profiles. The clamp has a wider throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N to engage the triangle type...

S-5! Clamp RibBracket I mount for corrugated metal roofs to mount directly into the crown, with (1) EPDM rubber gasket seal, (4) 8mm thru-holes, (1) slotted .4" x 1.25" hole, (4) self-tapping screws, & (1) M8 flange nut RibBracket I . S-5! clamps protect...

S-5! Clamp RibBracket II mount for corrugated metal roofs to mount directly into the crown. The Clamp RibBracket II mount comes with one (1) EPDM rubber gasket seal, four (4) 8mm thru holes, one (1) slotted .4" x 1.25" hole, and four (4) self-tapping...

S-5! Clamp RibBracket III mount for corrugated metal roofs to mount directly into the crown, with (1) EPDM rubber gasket seal, (4) 8mm thru holes, (1) slotted .4" x 1.25" hole, (4) self-tapping screws, & (1) M8 flange nut RibBracket III. S-5! clamps...